SU-A2D10 series size, mm 9 x 14 i/o 6 pad supply voltage 3.3v / 2.5v features ? wide frequency rangeC80.0mhz to 350.0mhz ? user specifed tolerance available ? will withstand smd refow temperatures of 183c for 4 minutes maximum ? high shock resistance, to 1000g ? 3.3 volt operation (other voltages available upon request) ? cover connected to ground ? enable/disable ? lvds output on pin 4, complement on pin 5 ? low jitter - wavecrest jitter characterization available ? high reliability - nel halt/hass qualifed for crystal oscillator start-up conditions ? overtone technology ? high q crystal actively tuned oscillator circuit ? power supply decoupling internal ? no internal pll avoids cascading pll problems ? high frequencies due to proprietary design lvds SU-A2D10 series rev a frequency range: 80.0mhz to 350.0mhz for the most up to date specifcations on each nel product, log on to our websitewww.nelfc.com drawing specifcations description the su-a29d10 series of quartz crystal oscillators provides a lvds compatible signal. creating a part number su - a 2d1 x - freq package code su 6 pad 9x14mm smd input voltage code specifcation a 3.3v b 2.5v tolerance/performance 0 100ppm 0-70c 1 50ppm 0-70c 7 25ppm 0-70c 9 customer specifc a 20ppm 0-70c b 50ppm -40 to +85c c 100ppm -40 to +85c electrical connections pin connection 1 enable/disable 2 n.c 3 ground 4 q output 5 /q output 6 v cc 357 beloit street, p.o. box 457, burlington, wi 53105-0457 u.s.a. phone: 262-763-3591 fax: 262-763-2881 email: nelsales@nelfc.com www.nelfc.com dimensions shown in inches and (mm).
operating conditions and output characteristics electrical characteristics parameter symbol conditions min typical max frequency 80.0mhz 350.0mhz duty cycle (2) @ v o /2 45/55% 55/45% logic 0 (2) v ol 0.80v 1.10v logic 1 (2) v oh 1.25v 1.55v differential voltage (2) v od 250 mv 450 mv disable voltage v ee =0v 0.8v enable voltage (5) v ee =0v 2.0v rise & fall time (2) tr,tf 20-80%v o 700 ps tpd (4) -0.5 ns +0.5 ns jitter, rms (3) 3 psec frequency stability (1) df/f overall conditions including: -100ppm +100ppm voltage, calibration, temp., 10 yr aging, shock, vibration general characteristics parameter symbol conditions min typical max supply voltage v cc 3.3v5% 3.135v 3.3v 3.465v supply current i cc 0.0 ma 80 ma output current i o continuous output current 0.0 ma 50.0 ma operating temperature t a 0c 70c storage temperature t s -55c 125c power dissipation p d 277 mw lead temperature t l soldering, 10 sec. 300c load 100 ohms across differential outputs start-up time t s 2 ms 10 ms environmental and mechanical characteristics mechanical shock per mil-std-202, method 213, condition e thermal shock per mil-std-833, method 1011, condition a vibration 0.060 double amplitude 10 hz to 55 hz, 35gs 55hz to 2000 hz soldering condition 300c for 10 seconds hermetic seal leak rate less than 1 x 10 -8 atm.cc/sec of helium footnotes: 1) standard frequency stability (20,25,50ppm & others available) 2) with load of 100 ohms across differential outputs. 3) jitter performance is frequency dependent. please contact factory for full wavecrest characterization. rms jitter bandwidth of 12khz to 20mhz. 4) tpd is phase shift between the falling edge of pin 4 and the rising edge of pin 5. 5) open to enable pin also enables the output. lvds SU-A2D10 series rev a frequency range: 80.0mhz to 350.0mhz
|
